Resistance Range
|
10kΩ - 1PΩ (dependent on test voltage) 4 Ranges or Auto Range:
Range 1: 1pA to 10nA, Range 2: 2nA to 100nA,
Range 3: 20nA to 10uA, Range 4: 2uA to 1mA
|
Resistance Accuracy
|
For Rx <20G (Vx): ±(2% of reading +5cnt) ,
For Rx >20G (Vx): ±(Vx/1pA) in ohms.
Max reading: Vx/0.1pA
Rx = Measured resistance in ohms, Vx = Programmed voltage in volts
|
Voltage Range
|
10 to 1000V DC in 1V steps, 1868A
50 to 5000V DC in 1V steps, 1868D
|
Voltage Accuracy
|
2% of setting, ±1V in uncalibrated mode
|
Source Resistance
|
100Ω, 1kV (1868A); 3.3kΩ, 5kV (1868D)
|
Charge Current
|
2/25/80mA (1868A); 2/10/18mA (1868D)
|
Discharge Resistance
|
100kΩ
|
Current Measure
|
1pA to 1mA
|
Current Accuracy
|
±[2% of reading +5cnts +1pA]
|
Input Impedance
|
For Ix > 10nA: 10kΩ ; For Ix < 10nA: 1MΩ ,Ix = Programmed current in amperes
|
Measure Limits
|
5 Programmable Limit Sets
|
Measurement Result
|
Resistance or Current
|
Measurement Mode
|
Continuous or Triggered
|
Averaging
|
1-100 measurements
|
Test Speed
|
Trigger Mode: 40msec, Continuous Mode: 90-4000msec,
(Depending on # to Average)
|
Programmed Time
|
Charge: 0 - 9999msec
(Charge R: 200Ω)
Measurement Delay: 0 - 9999msec
Discharge: 0 - 100sec or Auto mode
|
Auto: 0.1(Cx) as Vx goes to 1% Vt
Cx = Measured capacitance (μF)
Vx = Programmed voltage (V)
|
Zero/Offset
|
Automatic Zeroing of All Ranges or Individual Zeroing of 4 Ranges
|
Display
|
LCD graphic display
3.5 digit resolution
Line Graph: X-Y: I or R versus Time
|
Bar Graph: 8 ranges/2 decades/graph, Fixed or auto-scale
Indicators: HV, Measure, Bin, Remote
|
Standard Interfaces
|
RS232, IEEE 488, Remote I/O
|
Internal Storage
|
2 Global Setups (Save Instrument Setup and Sequence Setups)
4 User-Programmable Sequence Setups, (Up to 20 Steps each)
4 Pre-Programmed Sequence Setups
|
External Storage
|
PCMCIA Interface for 2M SRAM Memory
Cards (20 Setups/20 Steps each)
|
Input Terminals
|
HV: BNC Connector
I IN: Triaxial Connector
GUARD: Sheathed Banana Plug
|
Safety
|
Interlock Plug
Password-protected Charge Current (For I > 2mA)
HV Break Red LED/Push Button
|
Dimensions
|
(w x h x d):12.5 x 4.5 x 15.5 inches (312.5 x 112.5 x 387.5 mm)
|
Weight
|
28 lbs (12.7kg) net
41 lbs (18.6kg) ship
|
Environmental
|
Operating: 10°C to +40°C, 80% RH
|
Power
|
110V - 240V
50 or 60Hz
400W Max (1.8A at 220V AC, 3.2A at 125V AC)
|