4300 Series
3 models:
-
4310: 20 Hz to 100 KHz
-
4320: 20 Hz to 200 KHz
-
4350: 20 Hz to 500 KHz
-
43100: 20 Hz to 1 MHz
Overview
The 4300 Series LCR meters offer a blend of simplicity and functionality, making accurate and rapid measurements possible from 20Hz to 1MHz. Designed with versatility in mind, these meters are suitable for a wide range of applications within both testing and production settings.
Technical Specification
Measurement Functions
Impedance (Z), Phase Angle (Ө), Capacitance (C) Dissipation Factor (D), Inductance (L), Quality Factor (Q)
AC Resistance (Rac), Reactance (X), Susceptance (B) Conductance (G), Admittance (Y)
DC Resistance (Rdc) is an option (/R) on all models.
Frequency Range
4310: 20Hz to 100kHz
4320: 20Hz to 200kHz
4350: 20Hz to 500kHz
43100: 20Hz to 1MHz
Frequency Steps
5 Hz - 20 Hz to 1 kHz
50 Hz - 1 kHz to 10 kHz
500 Hz - 10 kHz to 100 kHz
5 kHz - 100 kHz to 1 MHz
Measurement Function -
DC Resistance (Rdc)
option (/R)
Series/parallel equivalent circuit
Any combination
Polar Form
Z + Ө, Y + Ө
Drive Level
(AC measurements)
Open circuit: 10 mV to 2V rms
Voltage step size: 10 mV (200 steps)
Short circuit: 100 µA to 20 mA rms
Current step size: 100 µA (200 steps)
Signal source impedance: 100Ω
DC Bias Voltage
Internal - 2 Vdc
External - up to ±40V may be connected via rear panel
Measurement Speeds
Four selectable speeds for all measurement functions
Up to 50 measurements per second depending on test frequency and setup condition
Measurement Ranges
Z, R, X 0.01 mΩ to > 1 GΩ
Y, B, G 0.1 nS to > 2 kS
L 1 nH to > 2 kH
C 0.01 pF to > 1 F
D, Q 0.0001 to 9999.9
Phase Angle -180° to +180°
Rdc 0.1 mΩ to > 100 MΩ
Binning (Optional)
User programmable PASS and FAIL bins. 25 way D-type interface connector.
Option /B1 (non-isolated) - Common 0V. Bin outputs 0 to 5V (nominal) with >10 mA current sink capability.
Option /B2 (isolated) - Common 24V input. Outputs 0 to 24V with >10 mA current source capability.
Applications
The 4300 Series is perfectly suited for:
-
Component manufacturers and quality control laboratories
Research and development departments
-
Production line
-
Educational purposes
Key Features
-
Broad Frequency Range: Capable of testing components from 20Hz to 1 MHz, particularly the 43100 model, catering to a wide array of applications.
-
High Accuracy: Offers a basic accuracy of 0.1%, ensuring reliable and precise measurements.
-
Fast Measurement Time: Less than 25ms measurement time, enhancing productivity in fast-paced environments.
-
Versatile Measurement Parameters: Supports a comprehensive set of parameters including C, L, Z, Y, X, B, Rac, Rdc, G, Q, D, and Ø.
-
Dual Test Mode: Allows for consecutive measurements with two different instrument parameters, such as two AC measurements at different frequencies or an AC and a Rdc measurement.
-
Display Capability: Can display up to four parameters simultaneously in two test mode, providing comprehensive data at a glance.
-
Adjustable Drive Level: Offers a drive level range from 10mV to 2Vrms, accommodating various test conditions.
-
Measurement Setup Recall: Enables saving and recalling up to 20 measurement setups with user-defined names for efficient testing.
-
Multiple Interfaces: Features standard RS232, GPIB, USB, or LAN interfaces for external control.
Optional Features
-
Component Binning Module: Enhances sorting capabilities with interface options for sorting machines, supporting both isolated and non-isolated modules.
-
Scaleizer Handler Module: Provides PASS/FAIL and data synchronization relay outputs for limit-checked measurements, with two output signal configurations available.